Home Trough screw conveyors Trough screw conveyor configurator

Trough screw conveyor

for horizontal and slightly ascending transport of bulk materials

Here you can configure the screw conveyor individually for your application and send it to us as an enquiry.

Pre-selected specifications are the least expensive standard options or the ones we recommend for technical reasons.
We check your information and offer you the optimal product based on our experience.

Trough screw conveyor

Send enquiry as a guest or

register nowSale to tradespeople only

The advantages of a user account:

You can temporarily save your configuration and edit it later.
You can view, edit and resend previous enquiries.
You do not need to re-enter your contact details for further enquiries. They will be transferred automatically to our enquiry forms.

Your commission

Product to be conveyed *

Bulk weight t/m³ *

Flow characteristics

Abrasivity

Food / Non Food *

Material *

Capacity in t/h *

Size of screw conveyor

Lenth of trough L in m *

Inclined conveying

Is the product to be conveyed in an uphill direction? Then please enter the required gradient in degrees °.

Dosing function

Do you want to dose your product with the trough screw conveyor?

Mixing function

Are products to be mixed in the screw conveyor? Please click on the image to choose.

No
Yes

Product feeding into the screw conveyor

Please click on the image to choose

Metered product feed
Product feedig e.g. from a small hopper
Product feeding from a silo

Inlet

Outlet

Side of drive

Shaft sealing

Please click on the image to choose

Shaft sealing ring made of PU
Double sealing ring with grease barrier
Packing gland seal
With purge air, without compressed air fittings
Paul Groth chooses the optimal shaft sealing

Speed monitoring at the end journal

Overflow detection

Please click on the image to choose

Without overflow valve
Overflow valve with magnetic safety switch
Inside overflow valve with inductive sensor
Capacitive sensor

Hinged cover with quick release and magnetic safety switch

Please click on the image to choose

Without hinged cover
Hinged cover over the whole length

Hinged bottom with quick release and magnetic safety switch

Please click on the image to choose

Without hinged bottom
Hinged bottom under the inlet
Distributed along the entire length of the screw

Brackets

Please click on the image to choose

Without brackets
Welded on holding plate in suitable number
Screwed on half shell with foot in suitable number

Installation site

Explosion protection ATEX inside *

Please select the ATEX design

Explosion protection ATEX outside *

Please select the ATEX design

Operating instructions

Further information we should take into account

Upload

up to 5 files, pdf, jpg or png (maximum 2 MB each)

	Description	File
1		File name: File size:

add upload