Home Screw feeder DRS-G Screw feeder DRS-G configurator

Screw feeder DRS-G

with inlet hopper 450 x 300 mm

Here you can configure the DRS-G screw feeder individually for your application and send it to us as an enquiry.

Pre-selected specifications are the least expensive standard options or the ones we recommend for technical reasons.
We check your information and offer you the optimal product based on our experience.

Screw feeder DRS-G

Send enquiry as a guest or

register nowSale to tradespeople only

The advantages of a user account:

You can temporarily save your configuration and edit it later.
You can view, edit and resend previous enquiries.
You do not need to re-enter your contact details for further enquiries. They will be transferred automatically to our enquiry forms.

Your commission

Product to be dosed *

Bulk weight t/m³ *

Flow characteristics

Abrasivity

Food / Non Food *

Capacity in l/h *

Length L in mm *

Dimension L: see dimension sheet at the top of the page, preferred length 600 mm, max. 900 mm

Inlet / hopper

Please click on the image to choose

Inlet 450 x 300 mm
Inlet 450 x 300 mm with loose counter flange
Inlet with 50 l hopper
Inlet with 100 l hopper
Inlet with 200 l hopper
Inlet with 500 l hopper
Inlet on customer's request - please specify in the "further information" field

Outlet

Please click on the image to choose

Outlet for JACOB pullring
Outlet for mounting a hose
Outlet with fixed flange PN10
Outlet with JACOB loose flange
Horizontal outlet
Outlet on customer's request - please specify in the "further information" field

Option above outlet

Please click on the image to choose

Transparent lid above outlet
Connection for aspiration Ø100 mm JACOB lip flange
Outlet with filter cage

Pneumatic shutter stamp

Please click on the image to choose

without shutter stamp
with shutter stamp

Dispersing agitator

Please click on the image to choose

Without, but can be retrofitted
Dispersing agitator
Lump breaker

Thread pull-out device

Please click on the image to choose

Without thread pull-out device
With thread pull-out device

Surfaces in contact with the product

Please click on the image to choose

2B, pickled
RA<0.8 μm, welds <1.6 μm

Shaft sealing

Please click on the image to choose

Shaft sealing ring made of PU
With purge air
Packing gland seal
Paul Groth chooses the optimal shaft sealing

Explosion protection ATEX inside *

Please select the ATEX design

Explosion protection ATEX outside *

Please select the ATEX design

Operating instructions

Further information we should take into account

Upload

up to 5 files, pdf, jpg or png (maximum 2 MB each)

	Description	File
1		File name: File size:

add upload